ИССЛЕДОВАНИЕ РАСПРЕДЕЛЕНИЯ НАПРЯЖЕНИЙ В ГРУНТЕ ПРИ ИСПОЛЬЗОВАНИИ АНКЕРОВ С ТРОСОМ ПОВТОРНОГО ПРИМЕНЕНИЯ Research on Stress Distribution Law of Recoverable Anchor Cable

Shuaihua Ye, Jun Zhang, Weina Ye

Аннотация


Приводится замкнутое теоретическое решение для распределения напряжений в грунте для анкеров с тросами повторного применения (Recoverable Anchor Cable). Задача решалась в упругой и упругопластической постановке с критерием Кулона. Формула распределения упругих напряжений модифицирована на основе пластического решения задачи о расширении цилиндрического отверстия. Приведено
сравнение с известными решениями.


Полный текст статьи публикуется в английской версии журнала
«Soil Mechanics and Foundation Engineering”, vol.61, No.6


Литература


R. Y. Shan, Y. H. Peng, and X. S. Kong, "Research progress of coal roadway support technology at home and abroad," Chinese Journal of Rock Mechanics and Engineering, 38(12), 2377-2403(2019).

S. H. Ye, G. W. Fang, and Y. P. Zhu, "Model establishment and response analysis of slope reinforced by frame with prestressed anchorsunder seismic considering the prestress," Soil Dynamics and Earthquake Engineering, 122, 228-234(2019).

C. C. Li, "Principles of rockbolting design," Journal of Rock Mechanics and Geotechnical Engineering, 9(3), 396-414(2017).

Q. Zhang, "Deformation control study on foundation pit support by pre-stressed pile-anchor," 6th International Conference on Advances in Energy, Environment and Chemical Engineering (AEECE), ELECTR NETWORK, 546, (2020).

W. L. Song, Y. Liu, and Q. M. Zheng, "Influence of anchor cable failure on a supporting system of pile anchor foundation pit," 2nd International Conference on Civil Engineering, Environment Resources and Energy Materials, Changsha, 634, (2021).

X. N. Gong and J. L. Yu, "Development and prospect of removable anchor technology," China Civil Engineering Journal, 54(10), 90-96(2021).

S. H. Ye and Z. F. Zhao, "Allowable displacement of slope supported by frame structure with anchors under earthquake," International Journal of Geomechanics, 20(10), 1943-5622(2020).

S. P. Zheng, "Application and Research of Recyclable cables in foundation pit support engineering," 2018 3rd International Conference on Automation,Mechanical Control and Computational Engineering (AMCCE 2018), Dalian, 1967, (2018).

Q. M. Zheng, Y. Liu, D. L. He, and X. W. Zhang, "Study on the Performance of Foundation Pit Supporting System Considering the Process of Anchor Recycling," 5th International Conference on Advances in Energy Resources and Environment Engineering (ICAESEE), Chongqing, 446, (2020).

D. Q. Li, M. Cai, and H. Masoumi, "A constitutive model for load-displacement performance of modified cable bolts," Tunnelling and Underground Space Technology, 68, 95-105(2017).

J. R. Zhang and B. F. Tang, "Hyperbolic function model to analyze load transfer mechanism on bolts," Chinese Journal of Geotechnical Engineering, 24(02), 188-192(2002).

X. W. Li, J. Nemcik, A. Mirzaghorbanali, N. Aziz, and H. Rasekh , "Analytical model of shear behaviour of a fully grouted cable bolt subjected to shearing," International Journal of Rock Mechanics and Mining Sciences, 80, 31-39(2015).

J. Q. Jia, B. X. Tu, H. T. Wang, G. Meng, and D. L. Yao, "Mechanical behaviors of pressure-dispersive prestressed anchor," Chinese Journal of Geotechnical Engineering, 33 (09), 1320-1325(2011).

C. A. You, "Mechanical analysis on anchorage segment of pressure-type cable," Chinese Journal of Geotechnical Engineering, 26(06), 828-831(2004).

S. Q. Ma, J. Nemcik, and N. Aziz, "An analytical model of fully grouted rock bolts subjected to tensile load," Construction and Building Materials, 49, 519-526(2013).

M. Ghadimi, K. Shahriar, and H. Jalalifar, "A new analytical solution for the displacement of fully grouted rock bolt in rock joints and experimental and numerical verifications," Tunnelling and Underground Space Technology, 50, 143-151(2015).

J. Q. He, C. B. Hu, and J. C. Zhang. "Mechanical analysis of anchorage segment of pressure-type cable based on the Mindlin solution," Hydrogeology and Engineering Geology, 39 (01), 47-52(2012).

L. Lu, Y. X. Zhang, and S. G. Wu, "Distribution of stresses on bonded length of compression type rock bolt," Rock and Soil Mechanics, 29(06), 1517-1520(2008).

F. Tahmasebinia, C. Zhang, I. Canbulat, et al. "A Numerical study of the behaviour of fully grouted cable bolts under static and dynamic loading," 10th Asian Rock Mechanics Symposium The ISRM International Symposium for 2018, Singapore, (2018) .

J. H. Chen, S. Saydam, and P. C. Hagan, "An analytical model of the load transfer behavior of fully grouted cable bolts," Construction & Building Materials, 101(1), 1006-1015(2015).

S. X. Tang, K. Yin, and H. L. Liu, "Distribution of stress along bonded length of pressure type recoverable anchor," Journal of Civil Engineering and Environmental Engineering, 40 (02), 1-5(2018).

Y. S. Pang, H. L. Liu, and J. W. Ke, "Stress distribution along bonded length of new-type recoverable anchor," Journal of PLA University of Science and Technology (Natural Science Edition), 10 (05), 461-466(2009).

D. Q. Li, H. Masoumi, P. C. Hagan, and S. Saydam, "Experimental and analytical study on the mechanical behaviour of cable bolts subjected to axial loading and constant normal stiffness," International Journal of Rock Mechanics and Mining Sciences, 113, 83-91(2019).

P. G. Fuller and R. H. T. Cox, "Mechanics of load transfer from steel tendons of cement based grouted," 5th Australasian Conference on the Mechanics of structures and Material, Melbourne, 189-203(1975).

D. J. Jarred and C. M. Haberfield, "Tendon/ grout interface performance in grouted anchors," Proc. Ground Anchorages and Anchored Structures, London, 3-12(1997).

L. B. Martín, M. Tijani, and F. Hadj-Hassen, "A new analytical solution to the mechanical behaviour of fully grouted rockbolts subjected to pull-out tests," Construction and Building Materials, 25(2), 749-755(2011).

Y. X. Zhang, Lu. L, X. Y. Rao, and J. Li, "Model test research on mechanical behavior of compression type rock bolt," Rock and Soil Mechanics, 31 (07), 2045-2050(2010).

R. Rui, Y. Y. Xia, J. C. Gu, and Z. S. Chen, "Field test and mechanical analysis of anchorage segment of pressure-dispersion anchors," Chinese Journal of Geotechnical Engineering, 34(05), 917-923(2012).

N. K. Kim, "Performance of tension and compression anchors in weathered soil," Jounal of Geotechnical and Geoenvironmental Engineering, ASCE, (12), 1138-1150(2003).

J. Li and L. J. Li, "Numerical analysis on a new pressure-type anchor cable with precast anchor head based on FLAC3d," 2016 2nd International Conference on Electronics, Network and Computer Engineering(ICENCE 2016), Yinchuan, 67, 237-241 (2016).

M. H. Zhao, S. S. Liu, L. X. Huang, and B. B. Liao, "Numerical simulation of pressure-type anchor based on energy principle," Chinese Journal of Geotechnical Engineering, 33 (04), 529-534(2011).

J. Nemcik, S. Ma, N. Aziz, T. Ren, and X. Y. Geng, "Numerical modelling of failure propagation in fully grouted rock bolts subjected to tensile load," International Journal of Rock Mechanics and Mining Sciences, 71: 293-300(2014).

Z. L. Xu, Elastic Mechanics, 4th ed, Higher Education Press, Beijing (2006).

Z. Y. Luo, X. J. Yang, X. N. Gong, "Expansion of cylindrical cavities in strain-softening material with different elastic moduli in tension and compression," Engineering Mechanics, (02), 40-45(2004).


Ссылки

  • На текущий момент ссылки отсутствуют.