ВЛИЯНИЕ "ЮБКИ" НА НЕСУЩУЮ СПОСОБНОСТЬ ОСНОВАНИЯ ВНЕЦЕНТРЕННО НАГРУЖЕННОГО ЛЕНТОЧНОГО ФУНДАМЕНТА INVESTIGATION OF SKIRT EFFECT ON ECCENTRICALLY LOADED MODEL STRIP FOOTING WITH LABORATORY TESTS

Murat Örnek, Mustafa Çalışıcı, Yakup Türedi, Nihat Kaya

Аннотация


Приведены результаты маломасштабных лабораторных экспериментов по определению влияния дополнительных конструктивных элементов ("юбки"), устраиваемых ниже подошвы эксцентрично нагруженного ленточного фундамента неглубокого заложения (полосового штампа) на несущую способность основания. Опыты проведены на плотных и рыхлых песках при разных эксцентриситетах приложения нагрузки и для различных комбинаций элементов, формирующих "юбочную" структуру. Вертикальные и наклонные жесткие вставки обеспечивали дополнительное сопротивление опрокидыванию и скольжению, провоцируемым эксцентриситетом. Экспериментально показано, что предельные нагрузки на основания увеличиваются за счет добавления "юбочной" структуры. При этом увеличение эксцентриситета ожидаемо приводит к снижению предельных нагрузок.

 

Полный текст статьи публикуется в английской версии журнала
"Soil Mechanics and Foundation Engineering" vol. 58, No.3.


Литература


References

N. Kaya and M. Örnek, “Experimental and numerical studies of T-shaped footings,” Acta Geotechnica Slovenica, 1, 43-58 (2013).

V.K. Singh, A. Prasad and R.K. Agrawal, “Effect of soil confinement on ultimate bearing capacity of square footing under eccentric–inclined load,” EJGE, 12(E) (2007).

E. Sadoglu, E. Cure, B. Moroglu and B.A. Uzuner, “Ultimate loads for eccentrically loaded model shallow strip footings on geotextile-reinforced sand,” Geotextiles and Geomembranes, 27, 176-182 (2009).

A. Musso and S. Ferlisi, “Collapse of a model strip footing on dense sand under vertical eccentric loads,” Geotechnical and Geological Engineering, 27, 265-279 (2009).

S.M. Nawghare, S.R. Pathak and S.H. Gawande, “Experimental investigations of bearing capacity for eccentrically loaded footing,” International Journal of Engineering Science and Technology, 2(10), 5257-5264 (2010).

E.S. Hosseininia, “Effect of load eccentricity on the bearing capacity of ring footings,” In: Zhou A., Tao J., Gu X., Hu L. (eds) Proceedings of GeoShanghai 2018 International Conference: Fundamentals of Soil Behaviours. GSIC 2018, Springer, Singapore (2018).

M.A. Hussein and A.J. Zedan, “Behaviour of rectangular footing subjected to gepseous soil under eccentricity-inclined loads,” Iraqi Journal of Civil Engineering, 11(2), 15-29 (2017).

M.Y. Ouahab, A. Mabrouki, M. Mellas and D. Benmeddour, “Inclination factors for strip footings on non-homogeneous clay,” Soil Mechanics and Foundation Engineering, 54(3), 155-160 (2017).

A.L. Rojas, S.L. Chavarriaa and M.M. Elizondob, “A new model for T-shaped combined footings part I: Optimal dimensioning,” Geomechanics and Engineering, 14(1), 51-60 (2018).

V. Sharma and A. Kumar, “Behavior of ring footing resting on reinforced sand subjected to eccentric-inclined loading,” Journal of Rock Mechanics and Geotechnical Engineering, 10, 347-357 (2018).

M.Y. Ouahab, A. Mabrouki, M. Mellas and D. Benmeddour, “Effect of load eccentricity on the bearing capacity of strip footings on non-homogenous clay overlying bedrock,” Transportation Infrastructure Geotechnology, 5, 169–186 (2018).

K. Sobhan, C. Patra, N. Sivakugan and B. Das, “Bearing capacity of eccentrically loaded rectangular foundation on sand,” 19th International Conference on Soil Mechanics and Geotechnical Engineering, Seoul, Republic of Korea, 17 - 22 September (2017).

M. Ornek, “Estimation of ultimate loads of eccentric-inclined loaded strip footings rested on sandy soils,” Neural Computing and Applications, 25(1), 39-54 (2013).

N. Kaya, “Experimental analyses of T-shaped footings,” MSc Thesis, Iskenderun Technical University, Turkey (2017).

G.G. Meyerhof, “The bearing capacity of foundations under eccentric and inclined loads,” In: Proceedings of the Third International Conference on Soil Mechanics and Foundation Engineering, 440–445 (1953).

S. Prakash and S. Saran, “Bearing capacity of eccentrically loaded footings,” Journal of SM and FE Division, ASCE, 97, 901–921 (1971).

B.A. Uzuner, “Centrally and eccentrically loaded strip foundations on sand,” PhD Thesis, Strathclyde University, Glasgow, Scotland (1975).

B. Moroglu, “The bearing capacity of the eccentrically loaded model strip footing on reinforced sand,” PhD Thesis, Black Sea Technical University, Turkey (2002).


Ссылки

  • На текущий момент ссылки отсутствуют.